Official LeEco Le Max 2 X820 Stock Rom High Quality

Download File > https://bltlly.com/2ttcw6

How to Install Official LeEco Le Max 2 X820 Stock Rom

The LeEco Le Max 2 X820 is a flagship smartphone that was released in May 2016. It features a 5.7-inch QHD display, a Snapdragon 820 processor, up to 6GB of RAM and 64GB of internal storage, a 21MP rear camera and an 8MP front camera, a fingerprint scanner, a USB Type-C port, and a 3100mAh battery. The device runs on Android 6.0 Marshmallow with LeEco's EUI skin on top.

If you want to restore your LeEco Le Max 2 X820 to its original stock firmware, or if you want to update, downgrade, unroot, unbrick, or repair your device, you can follow this guide to flash the official stock rom on your phone. You will need a computer, a USB cable, and some files to perform this process.

Disclaimer

This guide is for educational purposes only. We are not responsible for any damage or data loss that may occur to your device during or after following this guide. Proceed at your own risk.

Prerequisites

Backup your data. Flashing the stock rom will erase all your data on your device, including contacts, messages, photos, videos, apps, etc. Make sure you have a backup of everything you need before proceeding.

Charge your device. Make sure your device has at least 50% battery level to avoid any interruptions during the flashing process.

Enable USB debugging. Go to Settings > About phone > Tap on Build number seven times to enable Developer options. Then go back to Settings > Developer options > Enable USB debugging.

Download and install LeEco USB drivers on your computer. You can download them from here[^4^].

Download and extract QPST tool on your computer. You can download it from here[^1^].

Download and extract the official stock rom for your device model from here[^4^]. You will get a zip file containing several files, such as boot.img, system.img, userdata.img, etc.

Steps to Flash Official LeEco Le Max 2 X820 Stock Rom

Turn off your device and boot it into EDL mode. To do this, press and hold Volume Up + Volume Down + Power buttons together for a few seconds until you see a black screen with some Chinese text.

Connect your device to your computer using a USB cable. Your computer should recognize your device as Qualcomm HS-USB QDLoader 9008.

Open QPST tool on your computer and click on QFIL (Qualcomm Flash Image Loader).

In QFIL, click on Browse and locate the prog_emmc_firehose_8996_ddr.mbn file from the extracted stock rom folder.

Click on Load XML and select rawprogram0.xml and patch0.xml from the same folder.

Click on Download and wait for the flashing process to complete. It may take several minutes.

Once done, you will see a green message saying Download Succeed Finish Download.

Disconnect your device from your computer and reboot it normally.

Congratulations! You have successfully flashed the official stock rom on your LeEco Le Max 2 X820. You can now enjoy the original firmware and features of your device. 9160f4acd4